Door Operation Types and Construction

Door Operation Types

• Single Side Hung
• Double Lead
• Sliding
• Swinging (Oscilante)
• Centre Folding (Cierre de casa, varias hojas)
• Folding (Solo dos hojas)
• Revolving
• Overhead Up-and-Over (Garage)

Parts of a Door

1. Frame
2. Leaf
3. Threshold
4. Connecting Jamb
5. Hinge
6. Lock/Hatch

Wooden Folding Frame

Pieza en C cuyos cubretapas miden 60mm de ancho y thickness 16 y cuyo engranaje permite zapar el partition desde 0 hasta +15 o -7mm. Hay que dejar entre el partition y la C 13mm de espacio para el tornillo del hinge.

Steel Frames

Por el lado del eje

1. Built-in (Masonry) Steel Frames

Corner Frame

Solo cubre el corner del partition.

Masonry Frame

Cubre todo el partition

Frame for Gypsumboard Partition

Tiene dos piezas metalicas que sobresalen del core del partition y se atornillan al frame que cubre toda la esquina.

2. Subsequently-Mounted Door Steel Frames

• Corner frame fijado a muro con tornillo
• Adjustable frame, conectado a frame metalico en el core del TI
• Two part frame. Con frame metalico y ademas pieza en z alargada.

Stops

• Single. Unrebated frame and leaf (3 casos)
• Double. Rebated (stop 10-3-10/en el canto 17-26-17)

Sealants

1. In the frame (internal entrance door)
2. In the leaf (external entrance door)
3. Double sealing (leaf and frame, acoustic door)

Rebated Alternatives of Door Leaves

1. Rebated extension under face veneer and underplate
2. Visible extension (se ve la pieza que pega contra el marco)
3. Hidden extension
4. Glazing of a flush door leaf. 120 y min 24 de pieza de madera a continuación del cristal.
5. Hollow chipboard leaf

Construction of Flush Door Leaf

1. Frame (rail and stile, hardwood) alto abajo 80, ancho lateral 60, alto total 980x2, en medio tiene dos cuadrantes que miden 120x400
2. Extension piece (premarco)
3. Infill (chipboard, corrugated paper board, foam core, particle frame, batten frame, paper in honeycomb structure)
4. Underplate
5. Cover (face veneer, decorative laminate). Si tienen glazing como minimo interior a 120mm del frame.

Construction of Panelled (Stile and Rail) Door Leaf

Lock

La leaf mide thickness 43 de los que 17 sobresalen y 26 son los que quedan enfrentados por dentro del cierre. 23 es el ancho del cierre que se suceden 10frame-3stop-10leaf.

Stile and Rail Connection

Stile 110 ancho 9 de protuberancia, la lasca en diagonal 3mm.

Top Rail Glass

Mide de ancho 4mm.

Panelled

30 el triangulo del rail que se mete en el stile. 15 de introduccion. El triangulo acaba en railed de 3-14-3.

Parts

Stile and rail. Stile, top/bottom rail, crosser rail, uprights, raised panels (los que cubren).

Up to Date Engineered

Same but engineered stiles and rails, core, 1/34” thick panels, rubber expansion, 1/4” laminant cover.

Covers

• Paint (insitu, factory finishing, powder coated, sprayed paint)
• Laminated (decorative films, resin print, hard laminate coating)
• Veneer (real timber laminated sheet, surface: fume, dye/natural, laque satin/glossy/bright)

Steel, Aluminium, Plastics Doors

Sound Insulating Sliding Doors

• Double rebated (32-42dB)
• Triple rebated (40-43 double sliding part 43-47dB)

Different Climate Conditions

Leaf-Veneer-particle board-aluminium sheet-laminated profile-core. WIBO sealing in the sliding part.