Refer to the exhibit. When a static IP address is being configured on the host, what address should be used for the default gateway
Classified in Computers
Written at on 
English with a size of 4.69 KB.
HOSTàROUTER: 1
ENABLE
CONFIGURE TERMINAL
INTERFACE GIGABITETHERNET 0/0
IP ADDRESS 192.168.1.126 255.255.255.224
NO SHUTDOWN
EXIT
INTERFACE GIGABITEETHERNET 0/1
IP ADDRESS 192.168.1.158 255.255.255.240
NO SHUTDOWN
HOSTàSWITCH 2
ENABLE
CONFIFURE TERMINAL
INTERFACE VLAN 1
IP ADDRESS 192.168.1.157 255.255.255.240
NO SHUTDOWN
HOST/ROUTER 3
EXIT (LLEGAR AL CONFIGURE TERMINAL)
HOSTNAME MIDDLE
ENABLE SECRET CISCO
LINE CONSOLE 0
PASSWORD CLASS
LOGIN
EXIT
SECURITY PASSWORD MIN-LENGTH 10
SERVICE PASSWORD ENCRYPTION
IP DOMAIN-NAME CISCO
CRYPTON KEY GENERATE RSA
1024
EXIT
USERNAME CICLOS
LINE VTY 0 4
LOGIN LOCAL
TRANSPORT INPUT SSH
EXIT
INTERFACE GIBABITEETHERNET 0/0
IPV6 ADDRESS 2001:DB8:ACAD:A::1/64
IPV6 ADDRESS FE80::1 LIN
EXIT
GIBABITETHERNET 0/1
IPV6 ADDRESS 2001:DB8:ACAD:B::1/64
IPV6 ADDRESS FE80::1 LINK-LOCAL
EXIT
INTERFACE GIGABITEETHERNET 0/0
DESCRIPTION TO_IT_DEPARTMENT_SWITCH
EXIT
INTERFACE GIBABITETHERNET 0/1
DESCRIPTION TO_ADMINISTRATION_SWITCH
HOST/TFTP 4
ENABLE
CONFIGURE TERMINAL
LINE VTY 04
PASSWORD CLASS
LOGIN
EXIT
IP DEFAULT-GATEWAY 192.168.1.158
HOST/ROUTER 5
EXIT X2
COPY RUNNING-CONFIG TFTP
PIDEN à192.168.1.146
CONFIGURE TERMINAL
CRYPTO KEY GENERATE RSS
YES
1024
BANNER MOTD# WELCOME TO CISCO #