Notes, summaries, assignments, exams, and exercises for Technology for Other courses

Shipboard Equipment and Parts

Anchors

Anchor: An iron instrument, heavy and strong, shaped like a harpoon or hook. Doubled and attached to a rope, chain, or cable, it's thrown into the water to hold a vessel.

1. Plow anchor (Figure 1-37)
2. Danforth anchor (Figure 1-35)

Windlass

Windlass: A horizontal axis machine used to weigh chains. It has an iron mechanism called a chainstopper to bite and stop the chain. Often incorporates drums (Cabirol or warping ends).

Gypsy

Gypsy: A drum-shaped part of the windlass with notches or molds where the chain's mating link engages as the anchor is raised or lowered. The gypsy is in gear when turning the reel to raise the anchor, or it decouples and engages the brake to stop the shaft's rotation.

Escobar

Escobar: The location...

Nickel Steels

Nickel steels are known for their stainless and electrical properties. Nickel increases the tensile strength, yield stress, elongation, and impact strength or resilience of steel, while simultaneously reducing the influence of heat expansion. Steels containing 10 to 15% nickel can be hardened even with slow cooling.

Chromium Steels

Chromium imparts hardness and deeper penetration of the temper, allowing for oil hardening. Steels with 1.15 to 1.30% carbon and 0.80 to 1% chromium are used for film production due to their hardness. Smaller-scale applications use steels with 0.3-0.4% carbon and 1% chromium.

Chrome-Nickel Steels

More commonly used than chromium steels alone, chrome-nickel steels are employed in various ratios. Examples...

SQL Cheat Sheet

Insert Data

INSERT INTO tabla(col1,col2) VALUES(val2,val2)
INSERT INTO tabla SET col1='va1',col2='val2'
INSERT INTO ON DUPLICATE KEY UPDATE ...
REPLACE INTO tabla VALUES ...

Update Data

UPDATE tabla SET col1='val1' WHERE ...
UPDATE tabla SET col1=(SELECT ...)

Delete Data

DELETE FROM tabla WHERE cond

Transactions

TRANSACTIONS:
START TRANSACTION;
INSERT INTO ...;
SAVEPOINT prueba;
INSERT INTO ...;
ROLLBACK TO SAVEPOINT prueba;
SET autocommit=0;
COMMIT;

Locking

LOCK TABLES tabla1 WRITE, tabla2 WRITE;
UNLOCK TABLES;

Stored Procedures

CREATE PROCEDURE nombre()
BEGIN
DECLARE a INT;
SELECT x INTO a ...;
END;
CALL procedure();

Functions

CREATE FUNCTION nombre(m VARCHAR(255))
RETURNS INT
BEGIN
DECLARE existe INT DEFAULT 1;
DECLARE tot, k INT;
DECLARE cur_1 CURSOR...

Aircraft Identification Features

Learn to distinguish different aircraft models by their key visual characteristics:

• A330 vs B777: The B777 doesn’t have winglets, has three wheels per main landing gear strut, and the end of the fuselage is distinct.
• A320 vs B737: Standard Airbus/Boeing differences; B737s have a distinct engine shape (flattened bottom).
• B737 Series: Differences between -200, -300, -400, -500, -600, -700, -800, -900ER are primarily by size.
• B747: All have 4 engines. -200 and -300 do not have winglets, but the -300 has a larger upper deck hump. The -400 has winglets. The SP variant has no winglets and is shorter than others.
• B757: The -300 is significantly larger than the -200.
• B767: The -200 has no winglets. The -400 and -300 have

He has been a blacksmith for over 30 years and has created weapons for over 200 films. This is Man at Arms.

"The weapons of anime are always my favorite, and I know that the fans have been asking for this for a long time. This is Elucidator from Sword Art Online." He begins by sketching the Elucidator by hand and transferring the design onto 1075 SQT steel. Using a band saw with a bimetal blade, he cuts out the heart of the sword and refines the edges with a belt sander. He marks the internal cut with a soapstone marker and uses a plasma cutter to create the symbol. Another piece, cut from 3/8 gauge carbonized steel, will cover the main section. The edges are leveled, the surface is polished, and any leftovers are trimmed with a Dynafile.

Crafting

Camera Types for Video and Television

The camera's function is to capture the image. We can find a wide variety of video and television cameras, from cheaper designs to more sophisticated markets. We can find a great variety of models. When choosing a camera, several factors must be considered: price, practical aspects (e.g., weight), operational characteristics, and performance (image quality).

Studio Cameras

Studio cameras, for example, are used on set and are usually connected to a production control room. They create high-quality images. They tend to be large, bulky, heavy, expensive, and difficult to transport. They usually incorporate a prompter.

EFP Cameras

EFP stands for Electronic Field Production. These are lightweight cameras. Normally,...

Firefighting Pump Hydraulics: Essential Formulas & Calculations

This document outlines key formulas and operational guidelines for effective firefighting pump management and water delivery.

Pressure Calculations & Formulas

• Elevation Pressure (EP):
  • EP = 0.5 x height in feet
  • EP = 5 psi x (number of stories - 1)
• Head Pressure: Head Pressure = feet / 2.304
• Net Pump Discharge Pressure (Net PDP): Net PDP = PDP - Intake Reading
• Net Discharge Pressure (at Draft): Net DPD = PDP + Intake Pressure Correction
• Pressure Correction: Lift + Total Intake Hose Friction Loss ÷ 2.3
• Pump Discharge Pressure (PDP): PDP = Nozzle Pressure (NP) + Total Pressure Loss (TPL) (round to nearest 5 psi)
• Flow of Solid Stream: gpm = 29.7 x D² x √NP
• Nozzle Reaction (Solid Stream)

Fourier Transform

1. Definition

The Fourier Transform (FT) is used to convert an image from the spatial domain to the frequency domain. It expresses the image as a sum of sinusoidal functions of varying frequencies, amplitudes, and phases.

2. Intuition

In the spatial domain, we deal with pixel intensity at each location. In the frequency domain, we analyze how intensity varies—i.e., how fast brightness changes across pixels. This helps in analyzing patterns, removing noise, and performing filtering.

3. Mathematical Forms

• A. 1D Continuous FT (for signals):
• B. 2D Continuous FT (for images):
• C. 2D Discrete FT (DFT):

Used in DIP because images are digital:

• f(x,y): Input image
• F(u,v): Frequency domain representation
• M×N: Size of image

4. Inverse Fourier

Axles

Axles are intended to support rotating bodies without turning the shaft itself. They are primarily subject to bending loads.

Shafts

Shafts are machine parts that always rotate with the components they support. They transmit power or torque and are subject to both torsion and bending loads. Shafts can be solid or hollow. When a keyway is present, consideration must be given to the shaft diameter due to stress concentration.

Bearings and Supports

Both axles and shafts require support points to bear their weight, facilitate rotation, and prevent displacement. Bearings are the components that provide these supports for shafts and axles.

Bearing Types

Friction Bearings

In friction bearings, the shaft or axle slides within the bearing surface. The...

Item 4: Characteristics of the Internal Combustion Engine

1. Engine Performance

Chemical Energy (Fuel) / Thermal Energy (Combustion) / Mechanical Energy (Piston Displacement)

The chemical energy contained in the fuel is converted into heat through combustion. The resulting increase in pressure moves the piston, thus obtaining mechanical energy. Efficiency is calculated as follows:

n = (Energy obtained / Energy supplied) * 100 (%)

Power Loss:

• Heat Loss: Due to the cooling system and heat transfer to the outside.
• Mechanical Losses: Friction between moving parts and driving auxiliary devices.
• Chemical Losses: Due to incomplete combustion.

2. Types of Performance

• Thermal
• Mechanical
• Effective
• Volumetric

3. Key Features of Engines

• Engine Torque
• Specific Power
• Specific